Week 10  This week structure for the aft hull

The bits we received

And what we did with them

The front side sections are glued in position, and the aft side sections are then dry fitted, to make sure you get the parts all lined up properly.

Then the aft sections are glued in place, not forgetting to fit the last frame, which is held straight by the side frames.

Finally the upper side pieces, brackets and servo bracket are added.

Things not yet done

Issue 1 : Glue frames to keel. : Done, but deck supports still to fix.
Issue 2 : Glue frames to keel. : Done, but deck supports still to fix.
Issue 3 : Glue frames to keel. : Done, but deck supports still to fix.
Issue 4 : Glue frames to keel. : Done, but deck supports still to fix.
Issue 5 : Glue frames to keel. : Done, but deck supports still to fix.
Issue 6 : Fit keel pieces and deck supports.
Issue 9 : Stern frame to add. : Done
Issue 10 : Deck support to add.

 

Take me back to week 9

Take me to week 11